Research on YAG Laser Cutting of Soda-Lime Glass with Controlled Fracture 基于裂纹控制法的钠钙玻璃YAG激光切割技术研究
Determination of Biaxial Bending Strength for Soda-Lime Glass 钠钙玻璃的双轴向弯曲强度
Cyclic Fatigue Strength Prediction of Soda-lime Glass 钙钠玻璃的循环疲劳强度预测
Study on the dynamic fatigue strength of soda-lime glass by indentation 用压痕法研究玻璃的动疲劳强度
Finite element simulation of laser-controlled thermal stress separation of soda-lime glass plate 钠钙玻璃板激光热应力切割过程的有限元仿真
Preparation of sno_2: sb films on sio_2-coated soda-lime glass by chemical vapor deposition method 镀SiO2膜玻璃基片上化学气相沉积法制备SnO2:Sb薄膜
TiO_2 thin films ( anatase and rutile) were prepared on soda-lime glass substrates by sol-gel method. 采用溶胶-凝胶法制备了锐钛矿型和金红石型TiO2薄膜,利用光电流和XPS技术研究了薄膜表面吸附氧对不同晶型TiO2光催化活性的影响。
The biaxial and axial bending strength of soda-lime glass are also compared in this paper. 本文还将钠钙玻璃试件的双轴向弯曲强度和与其相应的单轴向弯曲(四点弯曲)强度进行了比较。
The soda-lime glass coated with these double functional films has the properties of ultravio-let-cutoff and transparent conduction. 该双层镀膜玻璃具有截止紫外线和透明导电双功能。
In this paper, the distribution of biaxial bending strength and the influence of loading rate on fatigue strength in the biaxial bending test by use of soda-lime glass specimen with micro indentation crack are studied. 本文研究了带有微小压痕裂纹的钠钙玻璃试件在惰性环境中的双轴向弯曲强度分布和加载应力速率对试件疲劳强度的影响。
The sheet resistance of antimony-doped tin dioxide thin film coated on soda-lime glass with SiO_2-coated is lower than that of without SiO-coating at the same heat treatment condition. 在热处理温度相同时,预先镀有SiO2膜的玻璃基片上制备的锑掺杂二氧化锡(ATO)薄膜的方块电阻较没有镀SiO2的小。
Effect of Redox Condition on the Coloring of Soda-lime Glass by Molybdenum 氧化还原条件对钼电极在钠钙玻璃中着色的影响
Absorption of nitrogen from the air and carbon from contaminating substance has been found on the surface of quartz glass, soda-lime glass and lead crystal glass samples. 在石英玻璃、钠钙玻璃和铅晶质玻璃的表面,发现吸附有来自空气中的氮以及有机沾污物的碳。
By using these targets, CeO2-TiO2 films and CeO2-TiO2/ SnO2: Sb films were deposited on soda-lime glass substrates by radio fre-quency magnetron sputtering. 以所制靶材用射频磁控溅射法在普通玻璃基片上沉积了CeO2-TiO2单层和CeO2-TiO2/SnO2:Sb双层薄膜。
Analysis of thermal stress in soda-lime glass heated by CO_2-laser 钠钙玻璃在CO2激光作用下的热应力分析
Sulphur-Bloom Treatment and Quality Verification of Soda-Lime Glass Infusion Bottles 钠钙玻璃输液瓶硫霜化处理及其质量验证
A film of pure titanium dioxide or Fe 3+ doped titanium dioxide was coated on soda-lime glass by sol-gel and dip-coating methods and then a kind of photocatalytic self-cleaning glass was prepared after it was calcined. 采用溶胶-凝胶法和浸渍提拉法在普通钠钙玻璃表面负载了一层纯TiO2膜或掺杂不同量的Fe3+的TiO2膜,经灼烧后制备了具有自洁功能的新型玻璃。
Application of preloading technique to the measurement of dynamic fatigue strength of soda-lime glass 预加载技术在钠钙玻璃动疲劳强度测试中的应用
Thin films of 8.0% in mole antimony-doped tin oxide were deposited on soda-lime glass substrates with and without SiO_2-coated by the solgel method. 用溶胶凝胶法在已镀SiO2膜的钠钙硅玻璃和没有镀SiO2的钠钙硅玻璃基片上镀制了锑掺杂摩尔分数为8.0%的二氧化锡薄膜。
Antimony-doped tin oxide ( ATO) films were deposited on SiO2 coated soda-lime glass substrates by the chemical vapor deposition method. 采用化学气相沉积法在镀有SiO2膜的钠钙硅玻璃基片上制备了Sb掺杂SnO2(antimony-dopedTinOxide,ATO)薄膜。
Calculation of Resistivity of Soda-Lime Glass at High Temperature by Nonlinear Regression Theory 应用非线性回归理论探讨钠钙玻璃高温电阻率的计算
TiO2 nano-crystalline thin films on glazed ceramic and common soda-lime glass were prepared by sol-gel method. 以釉面陶瓷和普通钠钙玻璃为载体,用溶胶凝胶法在其表面进行了纳米TiO2薄膜的负载。
The effects of additives and sintering temperature on densification behavior, electrically conductive performance and corrosion resistance to molten soda-lime glass were studied. 重点研究了添加剂体系、含量、烧结制度对SnO2基电极陶瓷的烧结行为、导电性能以及抗玻璃液侵蚀性能的影响。
Soda-lime glass, because of the advantages of low price, easy preparation and stability physical and chemical properties, become the most widely used glass material in the industrial and domestic. 钠钙玻璃凭借其价格低廉,容易制备和物理化学性质稳定的优点,成为当今工业,生活中应用最为广泛的一种玻璃材料。
Meanwhile experimental system was set up and the experiments of laser cutting soda-lime glass in straight lines were carried out. The impacts of laser power, laser scanning velocity and laser spot size on cutting quality were analyzed, respectively. 搭建了试验系统并进行了钠钙玻璃的YAG激光直线切割试验,分析了激光功率、激光光斑大小和激光扫描速度对切割质量的影响,并总结出了YAG激光直线切割钠钙玻璃的最佳参数。
Wavelength changes also can affect the width of the hole. Finally, the Q-switch CO2 laser was used to carry out the cutting experiment of soda-lime glass. 波长的变化也会对小孔的宽度产生影响。最后利用调QCO2激光对钠钙玻璃进行切割的研究。
The optimum parameters of YAG laser cutting soda-lime glass in straight lines were obtained. Finally, experimental research on cutting in curves and cutting of multi-layer glasses and glass tubes were carried out. 最后,进行了曲线轨迹、多层玻璃以及玻璃管的切割试验研究。
More and more people who turn their attention to laser machining manage to use the laser processing the soda-lime glass. 越来越多的人将目光投向激光加工,尝试用激光对钠钙玻璃进行加工。
The mechanized processing is very hard to meet the requirements of processing fine soda-lime glass effectively. 而传统的机械加工已无法对钠钙玻璃精细的加工。